BRA
100
Bevel Ripping Guide
Enables accurate bevels and chamfers from 15° through to 90°. Compatible with Triton Saw Table TCB100. Fully adjustable to handle long and wide workpieces. Accurate control for short bevels and perfect compound mitres. Integral calibration scales for easy alignment. Full instructions including guide to bevel angle settings required for the most common shapes.
|
BRA
200
Bevel Ripping Guide
Enables accurate bevels and chamfers from 15° through 90°. Makes use of the Workcentre protractor for control of short bevels and perfect compound mitres. Fully adjustable enabling you to bevel rip or chamfer long and wide pieces. Fits Triton Workcentre System 2000 directly; adaptor kit available for earlier models.
|
BJA
300
Biscuit Joiner
Triton’s unique Biscuit Joiner quickly fits to the Triton Router Table for fast, strong and invisible joints. Ideal for bevel, mitre, rail-to-stile, edge-to-edge, end-to-end, rail-to-post, edge-to-face, right angle joints and other forms of edge joinery. Includes TCT cutter and pack of biscuits. Additional biscuits available in packs of 50 (BJA050) and 500 (BJA056).
|
WCA
390
Blade Height Winder Kit
Provides quick and precise blade height adjustment. Control blade height by a winder through the table slot or by thumb wheel in crosscut mode. Allows your saw to remain at its full depth, in its most stable position. Suits Workcentre System Series 2000, including WCA201, WCA200, WCA001.
|
DCA
300
Dust Collection Bucket 20Ltr
Prevents sawdust filling up or clogging vacuum cleaners. Provides huge 20Ltr capacity. Easy to handle and empty. Fits Triton workcentres WCA201, WCA200, WCA001 and can be used with just about any product with dust extraction outlets.
|
FJA
300
Finger Jointer
Compatible with Triton Router Table for easy, accurate and attractive box joints. The simple way to make perfect 1/4" and 1/2" box joints in any board thicknesses, from 3mm to 32mm. Cuts several joints at the same time. Use with Triton Router Table model RTA300.
|
AJA
300
Jigsaw Kit
Get superb control of your jigsaw for accurate curves and feature work. This mounting kit for the Triton Router Table features an overhead blade stabiliser, adjustable hold-down pressure for steady operation and quick-mount clamps for fast removal and re-fitting. Compatible with most makes of jigsaw.
|
ETA
300
Maxi Sliding Extension Table
Huge capacity and easy-to-read calibration scales allow operator to cut large sheets, including full size 2400 x 1200mm. Table can be locked in position for conventional ripping of wide workpieces. Sliding table for panel saw use. The patented rip fence design allows fence settings at all angles. Incorporates work hold-down clamps.
|
ETA
100
Mini Sliding Table
Provides a substantial increase in rip and crosscutting capabilities. Unique multi-position fence for mitre and taper cuts with crosscut up to 600mm and conventional rip to 1000mm. Folds for storage. Compatible with all Triton Workcentres.
|
AJA
150
Overhead Mounting Kit
Router slide plate for overhead work. Suits most routers for cross trenching on the Triton Workcentre. Also suits fitting of most jigsaws for use with early model Triton Router and Jigsaw Tables (manufactured prior to model RTA300). Offers high accuracy for shelving, cabinets, built-in cupboards etc. Robust steel construction.
|
EPA
001
Planer Attachment Kit
Combines the finish of an electric planer with the rigid guidance of a Triton Workcentre - for perfectly smooth, straight faces on all your work. Clean dust hose and detachable collection bag included. Quickly folds for fast changes between planer and saw modes. Adjustable pressure fingers hold your workpiece against the fence.
|
RTA
300
Precision Router Table
Versatile router table for use on Triton Workcentres and Router Stands. Accepts most 1/4" and 1/2" routers for shaping, planing, rebating, trenching, moulding and grooving. Large, rigid work table with sliding table insert with removable protractor. High-faced fence with micro adjusters and planing shims. Safety guard with dust extraction facility.
|
ABA
020
Saw Stabilising Bracket
Triton Stabilising Bracket facilitates accuracy when using the Triton Workcentre, supporting the saw motor. It minimises saw deflection when cutting under load, and saw slump when the saw is changed from the table saw to the crosscut mode or vice-versa. The bracket is fully adjustable for various cutting depths and angles.
|
AWA
200
Retractable Wheel Kit
Pair of retractable wheels provides easier mobility for the Series 2000 Workcentre. They cope with rough terrain and can even climb steps. Retractable for stability when workcentre in use. Easy to fit. Durable long-lasting construction
|
DCA
250
Workcentre Dust Bag
Easy-fit dust bag with detachable pouch. Combined with a vacuum connection to the overhead guard, this dust bag collects almost 100% of the dust created in tablesaw mode. Compatible with MK3 and Series 2000 Workcentres. Dust Bag model DCA100 required for Triton Saw Table. Includes vacuum hose and bayonet and tapered hose connectors.
|